Driver and passenger seats make cracking noise when cornering - AF91.10-P-1101DG
MODEL 220.### ## up to 420055
MODIFICATION NOTES
| 24.1.06 | Work procedure extended. The contact areas of the tunnel-side bearing bushings must be greased (effective immediately). |
OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES
| Category | Op. no. | Operation text |
|---|---|---|
| P | 915085 | Install new bearing bushings (2) in seat cushion adjustment on the rocker panel side, location........ (with seat removed) |
| Damage code | Cause | Remedy | |
|---|---|---|---|
| 91 030 36 | Cracking noise when cornering. | 1 Remove driver's seat | |
| Model 220.0/1 up to 31.8.02. | AR91.10-P-1000M | ||
| Model 220.0/1 as of 1.9.02 | AR91.10-P-1000MB | ||
| 2 Remove driver's seat cushion | |||
| Model 220.0/1 up to 31.8.02. | AR91.10-P-1070M | ||
| Model 220.0/1 as of 1.9.02 with code (803) model year 2003. | AR91.10-P-1070MB | ||
| 3 Press bearing bushings (3) out of seat cushion guide (4) in direction of arrow |
|||
| 4 Press out bearing bushings (tunnel-side). |
|||
| 5 Grease bearing bushings (tunnel-side) and slide behind plastic lugs. |
|||
| 6 Slide bearing bushings (3) behind plastic lugs (6) |
|||
| 7 Install driver's seat cushion | |||
| Model 220.0/1 up to 31.8.02. | AR91.10-P-1070M | ||
| Model 220.0/1 as of 1.9.02 with code (803) model year 2003. | AR91.10-P-1070MB | ||
| 8 Install driver seat. | |||
| Model 220.0/1 up to 31.8.02. | AR91.10-P-1000M | ||
| Model 220.0/1 as of 1.9.02 | AR91.10-P-1000MB |
Fig 1: Identifying Front Seat, Front Seat Frame, Bearing Bush, Seat Cushion Guide, Plastic Slider And Plastic Lugs
The replacement part bearing bushing (3) is primed in black.
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| A 000 992 37 10 | Bearing bush | As required |
| A 002 989 07 51 | Multipurpose grease for metal (contents of tube is enough for approx. 50 applications) | As required |