Status indicator, location/function - GF82.95-P-2002SZ

MODEL 215.3, 220.0 /1 with CODE (383a) Tele-Aid fixed installation telephone with CODE (494a) USA version 

The system operates automatically in the event of a crash! The system is activated manually by pressing the SOS switch (S93/3s1). This may be the case for emergency situations or when an accident is spotted. The activated emergency call system is indicated by a flashing red LED in the SOS switch (S93/3s1). If a recall to the vehicle by the emergency call center is not be replied to, a search and rescue operation will be initiated in due course by the local rescue teams. If the emergency call system is unable to establish a connection to the emergency call center or the subscriber identification module (SIM) card has not been authorized, the system automatically calls the police emergency call number "911" and tries to establish a connection via the hands-free system. In this case, no data are transferred by SMS.

SOS switch (S93/3s1) 

The SOS switch (S93/3s1) is covered with a safety flap bearing red lettering. The flap is labeled "SOS". By tipping on the safety flap, it is released and opens independently with the help of a spring mechanism. Pressing the SOS switch (S93/3s1) for longer than 0.5 sec. activates the system.

MB-Info and breakdown assistance button group (S93/6) 

The MB-Info and breakdown assistance button group (S93/6) is located on the left of the center console at the right front. Pressing a button in the MB-Info and breakdown assistance button group (S93/6) for longer than 0.5 s activates the system. The activated system is indicated by a flashing red LED in the buttons. On pressing a button in the MB-Info and breakdown assistance button group (S93/6), an SMS is automatically sent.

At the same time as the SMS is sent, a voice connection to the Service Center is established immediately.

Status reports 

The status messages are output in the display of the following components:

• COMAND operating, display and control unit (A40/3)
• Multifunction display (A1p13) of instrument cluster (A1)