Remove/install exhaust manifold - AR14.10-P-3915AA

ENGINE 112.922 in MODEL 220.063 

ENGINE 112.923 in MODEL 129.059 

ENGINE 112.943 in MODEL 129.064 

ENGINE 112.944 in MODELS 220.065 /165 

ENGINE 113.941 in MODELS 220.070 /170 

ENGINE 113.960 in MODELS 215.375, 220.075 /175 

ENGINE 113.961 in MODEL 129.068 

ENGINE 112.972 in MODELS 220.067 /167 

ENGINE 112.975 in MODELS 220.087 /187 

ENGINE 113.948 in MODELS 220.083 /183 

ENGINE 113.966 in MODELS 220.084 /184 

Shown on engine 112 in model 220 

Shown on engine 113 in model 129 

	Remove/install
1	Remove catalytic converter or front exhaust system	Models 215, 220	AR49.10-P-5531AA
		Model 129	AR49.10-P-5531AB
2	Remove cover on front side of engine
3	Remove air filter housing
4	Remove ignition coils		AR15.12-P-2003A
5	Remove exhaust manifold	Installation:  Replace nuts (156/1) and gaskets (156/5).
		Nut on exhaust manifold	*BA14.10-P-1001-01B
		If bolts on the flange connection of front exhaust system/exhaust manifold are stiff, or the thread is damaged: ↓
		Replace the rivet nuts in the exhaust manifold.	AR49.10-P-5531-01DA
		Flange connection, exhaust manifold and front exhaust pipes	*BA14.10-P-1002-01B
6	Install in the reverse order

Number	Designation		Engine 112 except 112.951/976	Engines 113.940/941/942/943/944/945/946/948/960/961/962/963/964/965/966/967/968/969/971/980/981/982/984/986/992/993/995
BA14.10-P-1001-01B	Nut on exhaust manifold	Nm	16	16
BA14.10-P-1002-01B	Flange connection, exhaust manifold and front exhaust pipes	Nm	20	20