Manual opening/closing, function - GF72.29-P-3006S

MODEL 220

Function prerequisites

Voltage not too low or too high and
Circuit 15 ON or circuit 15R ON

Function

The manual up/down function is actuated by pressing the power window switch up to the first catch point in the direction "open" or "close". The corresponding door control module (N69/1, N69/2, N69/3 or N69/4) then actuates the power window motor (M10/3, M10/4, M10/5 or M10/6) as long as the switch is actuated.

	Power window switch, rear doors, location/purpose/design/function		GF72.29-P-4104S
	Left front power window switch group, location/purpose/design/function		GF72.29-P-4112S
	Left front door control module, location/purpose/design/function		GF72.29-P-4105S
	Right front door control module, location/purpose/design/function		GF72.29-P-4106S
	Rear door control module, location/purpose/design/function		GF72.29-P-4102S
	Front power window motor, location/function		GF72.29-P-4108S
	Rear power window motor, location/function		GF72.29-P-4109S