Removing, disassembling, assembling and installing radiator cowl - AR88.40-P-4000N

MODEL 215 

Fig 1: Identifying Radiator Cowl Remove/Install Components (1 Of 2)

Fig 2: Identifying Radiator Cowl Remove/Install Components (2 Of 2)

	Removal, installation
1	Open engine hood (3)	Installation:  Check locking function of engine hood lock and retaining hook.
2	Unscrew screws (2)
3	Pivot radiator cowl (1) slightly downward (arrows) and pull out of eyes (4) toward front	Installation:  Install handle for retaining hook (5) in radiator cowl (1) and check for proper function.
	Disassembly, assembly
4	Unlock trim strips (6) and remove	To unlock move trim strips slightly toward outside.
5	Unclip insert (7) together with Mercedes star from radiator cowl (1)	Press collar on radiator cowl (arrow) back on left and right with screwdriver and remove insert upward together with Mercedes star
6	Remove Mercedes star from insert (7)	Lift clips (8a).
7	Install in opposite order