Accepting a call, telephone function - GF82.70-P-2009S
MODELS 215, 220 as of 1.6.04 with CODE (388) "Portable CTEL" UPCI telephone system
With the Universal Portable CTEL Interface system (UPCI), all phone calls with the portable CTEL (A34/6) take place exclusively via the hands-free system.
The user has several options for accepting a telephone call:
- By pressing the "accept telephone call" button at the particular portable CTEL (A34/6).
- By pressing the "accept/terminate telephone call" button (S111s3) at the multifunction steering wheel (MFL).
- With code (813) voice control system (VCS) through voice input after operating the VCS switch (S93/2).
- By pressing the "accept telephone call" control button at the COMAND operating, display and control unit (A40/3) with code (527) COMAND APS (with navigation).
Only model 220
By pressing the "accept telephone call" at the rear telephone handset (A24/8) it is possible to accept telephone calls in "private mode".
| Telephone antenna, location/task | GF82.62-P-4105S | ||
| Compensator, location/task | GF82.70-P-3109S | ||
| Hands-free microphone, location/task | GF82.70-P-4102SA | ||
| UHI Portable CTEL Receiver (Universal Portable CTEL Interface), location/task | GF82.70-P-5000S | ||
| Universal Portable CTEL Interface (UPCI [UHI]) control unit, location/task | GF82.70-P-5100S | ||
| Telephone/portable CTEL/STH radio remote control antenna splitter, location/task | GF82.70-P-5200S |