Manual opening/closing, function - GF72.29-P-3006S
MODEL 220
Function prerequisites
- Voltage not too low or too high and
- Circuit 15 ON or circuit 15R ON
Function
The manual up/down function is actuated by pressing the power window switch up to the first catch point in the direction "open" or "close". The corresponding door control module (N69/1, N69/2, N69/3 or N69/4) then actuates the power window motor (M10/3, M10/4, M10/5 or M10/6) as long as the switch is actuated.
| Power window switch, rear doors, location/purpose/design/function | GF72.29-P-4104S | ||
| Left front power window switch group, location/purpose/design/function | GF72.29-P-4112S | ||
| Left front door control module, location/purpose/design/function | GF72.29-P-4105S | ||
| Right front door control module, location/purpose/design/function | GF72.29-P-4106S | ||
| Rear door control module, location/purpose/design/function | GF72.29-P-4102S | ||
| Front power window motor, location/function | GF72.29-P-4108S | ||
| Rear power window motor, location/function | GF72.29-P-4109S |