Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09A

Fig 1: Identifying Removal And Installation Tool (140 589 10 43 00)

1. Mount remover and installation tool (038) on the rear axle housing.
2. Using thrust piece (038a) part 16, pull the large tapered roller bearing outer race (46b) out of the rear axle housing.
   Fig 2: Removing Tapered Roller Bearing Outer Races From Rear Axle Housing

   
3. Using thrust piece (038b) part 18, press out the small tapered roller bearing outer race (43e).
4. Detach remover and installation tool (038).
   Fig 3: Identifying Thrust Piece