LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> S500 Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication, Oil Cooling - 215 & 220 Chassis >> Testing & Repair >> Check oil level - AR18.00-P-3035 >> Check oil level - AR18.00-P-3035-01DA

Check oil level - AR18.00-P-3035-01DA

FLUID SPECIFICATION OIL LEVEL CHECK

Number Designation Engine 113.991 in model 215, 220
BF18.00-P-1001-03DA Oil level Maximum mm 110
Minimum mm 95
BF18.00-P-1002-03DA Oil dipstick indication from 83 mm to 107 mm (oil level too low) 83 mm Replenished oil quantity in liters +2.4
85 mm Replenished oil quantity in liters +2.2
87 mm Replenished oil quantity in liters +2.1
89 mm Replenished oil quantity in liters +1.9
91 mm Replenished oil quantity in liters +1.8
93 mm Replenished oil quantity in liters +1.6
95 mm Replenished oil quantity in liters +1.5
97 mm Replenished oil quantity in liters +1.3
99 mm Replenished oil quantity in liters +1.1
101 mm Replenished oil quantity in liters +0.9
103 mm Replenished oil quantity in liters +0.7
105 mm Replenished oil quantity in liters +0.5
107 mm Replenished oil quantity in liters +0.3
BF18.00-P-1003-03DA Oil dipstick indication from 109 mm to 111 mm (oil level correct) 109 mm Oil quantity in liters 0.0
110 mm Oil quantity in liters 0.0
111 mm Oil quantity in liters 0.0
BF18.00-P-1004-03DA Oil dipstick indication from 113 mm to 121 mm (oil level too high) 113 mm Extracted oil quantity in liters -0.3
115 mm Extracted oil quantity in liters -0.5
117 mm Extracted oil quantity in liters -0.7
119 mm Extracted oil quantity in liters -0.9
121 mm Extracted oil quantity in liters -1.1
Fig 1: Identifying Measuring Rod (120 589 07 21 00)
G04840293
  1. Position vehicle with warm engine on an even surface.
  2. Switch off engine and maintain a waiting time of approx. 5 minutes.
  3. Unplug plug (1) of oil dipstick guide tube (2).
  4. SPECIAL TOOL Lead the dipstick (3) into the oil dipstick guide tube (2) until its tip is in the engine oil pan.

    IMPORTANT Leave there for at least a 3 seconds dwell time.

    IMPORTANT The collar of the dipstick grip end does not sit on the oil dipstick guide tube (2).

    IMPORTANT Do not bend the SPECIAL TOOL dipstick (3). The SPECIAL TOOL dipstick (3) must be pushed and guided according to the form of the oil dipstick guide tube (2).

    Shown on model 203 with engine 112 

    Fig 2: Identifying Unplug Plug And Oil Dipstick Guide Tube - Shown On Model 203 With Engine 112
    G04840294
  5. Read off engine oil level on dipstick SPECIAL TOOL (3).
  6. Establish the oil replenishment quantity from the oil level table.
  7. Adjust engine oil level correctly, if required.
  8. Place plug (1) onto oil dipstick guide tube (2).