Removing and installing lock cylinder on glove compartment lid - AR68.10-P-1250M

MODEL 215, 220 

Illustrated on model 220 

Fig 1: Identifying Removal/Installation Lock Cylinder On Glove Compartment Lid - Model 215,220

	Removal, installation
1	Remove glove compartment		AR68.10-P-1400M
2	Unscrew mounting screws for lock cylinder (1)	Lock cylinder (1) is screwed onto instrument panel (2) from rear
3	Remove lock cylinder (1) to side
4	Unhook control cable from eye (arrow) on lock cylinder (1)	Installation:  Check function of control cable, adjust with knurled nut if necessary
5	Install in opposite order