Removing and installing voice control system control module - AR82.70-P-0003M

MODEL 215, 220 as of 1.7.00 with CODE (813b) Voice control system (VCS) with CODE (853) MB standard cellular telephone with CODE (855) TELE AID 

Shown on model 220 

Fig 1: Identifying Voice Control System Control Module Remove/Install Components (Shown On Model 220)

	Removing and installing
1	Connect quiescent current retention unit		*WH58.30-Z-1012-09A
	Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries.	No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
2	Disconnect ground cable of battery		AR54.10-P-0003I
	Notes on battery	All models	AH54.10-P-0001-01A
3.1	Remove rear seat cushion	Model 215.	AR91.12-P-1020N
		Model 220.	AR91.12-P-1020MA
3.2	Remove bucket seats	Model 220 with code 401, right side only	AR91.12-P-1020M
4	Remove seat adjustment device on rear seat	Model 220 with code 401, right side only	AR91.12-P-1520M
5	Fold back cover mats
6	Disconnect connector from voice control system control module (A35/11)
7	Unscrew screws (4) from assembly plate (3)
8	Install in the reverse order
9	Check for proper function