Removing, installing seat bench - AR91.12-P-1010GJ

MODEL 163.136 /154 /172 up to 8/31/99 2/3 Seat bench

Fig 1: Identifying Seat Bench Components

	Removal, installation
1	Remove head restraints	See Owner's Manual.
2	Unclip cover (1) on left side of rear seat mount
3	Remove screws (2) for rear seat mount	Installation: Replace screws provided with Loctite®.
			*BA91.12-P-1001-03A
			Figure
4	Remove 2/3 seat bench	Through left rear door or through liftgate.
5	Install in reverse order

Rear seats

Number	Designation		Model 163 up to 08/99
BA91.12-P-1001-03A	Screw, rear seat console to vehicle floor	Nm	35

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)