Secondary air injection relay, location/task/design/function - GF14.30-P-3101F

ENGINE 104.941 /943 /944 /991 /994 as of 1.8.96

ENGINE 104.995

with CODE (494a) USA version

with CODE (807) Model year 1997

with CODE (808) Model year 1998

with CODE (498) as of Model Year 97 Japanese version

ENGINE 111.951/952

ENGINE 111.974

with CODE (494a) USA version

with CODE (807) Model year 1997

with CODE (808) Model year 1998

ENGINE 112.910 /911 /912 /914 /920 /921 /922 /923 /940 /941 /942 /943 /944 /946 /947 with CODE (494a) USA version with CODE (925) low emission EURO3

with CODE (926) low emission EURO4

ENGINE 112,113 (except 112.96,113.99) as of 1.6.00

ENGINE 113.940 /941 /942 /943 /960 /961

with CODE (494a) USA version

with CODE (925) low emission EURO3

with CODE (926) low emission EURO4

ENGINE 119.980/981/982/985

with CODE (494a) USA version

with CODE (923a) low emission D3

with CODE (920a) with exhaust air pump (secondary air injection) as of 12/96

ENGINE 120.982/983

ENGINE 137.970

ENGINE 166.940 in MODEL 168.031 /131 with CODE (925) low emission EURO3/D4

ENGINE 166.960 in MODEL 168.031 /033 /133 with CODE (925) low emission EURO3/

ENGINE 166.990 in MODEL 168.032 /132 with CODE (925) low emission EURO3/D4 ENGINE 166.995 in MODEL 168.035 /135 with CODE (925) low emission EURO3/D4

Fig 1: Identifying Secondary Air Injection Relay - Shown On Model 129

Secondary air injection relay position	Model 129	GF14.30-P-3101-01A
	Model 140	GF14.30-P-3101-01S
	Model 163	GF14.30-P-3101-01GH
	Model 168	GF14.30-P-3101-01GC
	Model 170	GF14.30-P-3101-01G
	Model 202, 208	GF14.30-P-3101-01E
	Model 203, 209	GF14.30-P-3101-01P
	Model 210	GF14.30-P-3101-01F
	Model 211	GF14.30-P-3101-01T
	Model 215, 220	GF14.30-P-3101-01K
	Model 230	GF14.30-P-3101-01R
Secondary air injection relay task	Engine 104, 111, 112, 113, 119, 137, 166: operating electric air pump and air pump switchover valve Engine 104 HFM, 120: operating air pump electromagnetic clutch and air pump switchover valve
Air injection relay design	Vehicle specific relay with flat plug contact and a N.O. contact.
Secondary air injection relay, function	The secondary air injection relay is operated by the ME-SFI control unit through an output stage by means of a GND signal.