Electronic Stability Program (ESP) Special features - GF42.45-P-0001-05A

Models 163, 203, 209 

Manufacturer TEVES 

ESP Mk20 Model Series 203 from SOP to 07/01 

Description

• ESP hydraulic unit with integral control unit (detachable)
• 2 Brake system pressure sensor on master cylinder
• Yaw rate and lateral-acceleration rate sensor in separate casing
• Brake light control with brake light switch

Manufacturer TEVES 

ESP Mk25 Model Series 203 from 08/01 

Model 163 as of 09/02 

Model Series 209 from SOP 

Description

• ESP hydraulic unit with integral control unit (detachable)
• 1 Brake system pressure sensor on master cylinder
• Yaw rate sensor and lateral-acceleration sensor integrated within a single housing (yaw rate and lateral acceleration sensor)
• Brake light control without brake light switch

  The ESP system's electronic control unit recognizes braking maneuvers based on signals from the brake pressure sensor, the diaphragm travel sensor and the BAS release switch.