Remove/install rear brake cable at wheel carrier - AR42.20-P-0525-03GH

Brake disks, brake cover

Number	Designation			Model 163
BA42.10-P-1003-06A	Bolt, brake cover to steering knuckle / wheel carrier	M6	Nm	10
BA42.10-P-1003-06A	Bolt, brake cover to steering knuckle / wheel carrier	M8	Nm	-

Fig 1: Identifying Sleeve (163 589 00 14 00)

Unscrew retaining bolts (83a) for brake cover (83) and pull brake cover towards the hub.
Unclip the brake cable and sleeve (085) from the wheel carrier, inserting the sleeve in the through-hole for the brake cable.
Pull brake cable out of wheel carrier.

Shown on vehicle with floating caliper

Fig 2: Identifying Retaining Bolts For Brake Cover

Fig 3: Identifying Brake Cable And Sleeve From Wheel Carrier