Connect compression tester - AR01.10-P-0010-01GV

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Fig 1: Identifying Compression Recorder (001 589 76 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Electrical Connection Set (220 589 00 99 00)

Courtesy of MERCEDES-BENZ USA

1. Remove control unit box cover (1).
   Fig 3: Identifying Control Unit Box Cover

   Courtesy of MERCEDES-BENZ USA
2. Clip connection terminal (A) of compression tester onto circuit 30, 15, 61 terminal block (3-pin) (X12/3).
   Fig 4: Identifying Terminal Of Compression Tester Onto Circuit 30, 15, 61 Terminal Block (3-Pin)

   Courtesy of MERCEDES-BENZ USA
3. Disconnect connector at control unit box/engine separation point (X35/63).
4. Connect adapter line (2) with pin 6 of control unit box/engine separation point (X35/63).
5. Connect adapter line (2) to the cable of the compression tester.

Fig 5: Identifying Control Unit Box/Engine Separation Point Connector And Pin 6

Courtesy of MERCEDES-BENZ USA