Setting Time
Start engine. Press SVC on Command control unit. Country, time zone, date and time will display if clock has been set by GPS. If information does not display, perform the following:
- Turn right rotary/push-button to highlight "Date/Time..." in settings menu and press to confirm. Menu displays date and time. See Fig 1 .
- Press right rotary/push-button. Day appears in red letters, setting mode is active. Turn right rotary/push-button right or left to set day. Press right rotary/push-button to confirm setting. Day appears in black letters and cursor moves one position to right.
- Repeat procedure to set month, year, hours and minutes. If clock is set by GPS, minutes will change in 30 minute intervals. GPS will set to exact minute.