Remove/install water shield - AR61.30-P-0010A

MODEL 461.302 /304 /305 /331 /332 /333 /334 /340 /342 /343 /344 /345 /346 

MODEL 463 

Shown on model 463 on left rear water shield 

Fig 1: Locating Water Shield

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Unscrew sheet metal screws (arrows) from water shield	Installation:  Check plastic expanding anchor for damage, replace if necessary.
2	Carefully pull water shield out of fender flare
3	Install in the reverse order