Adjusting shift rod - AR27.60-P-0980GM

TRANSMISSION 722.6 in MODEL 461.304/305/333/334/340/343/344/346, 463.244/245/250/243/246/247/248/249/254/322/323/309/332/333/270/271 

TRANSMISSION 722.9 in model 463.303/306/336/340/341/346/202/222/236/237/247/248/249/254 

Fig 1: Identifying Shift Rod Components

Courtesy of ABLE BODY CORP.

	Adjust
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle.		AR00.60-P-1000G
2	Set selector lever on electronic selector lever module control unit (N15/5) to position "D"	Fix the selector lever in position "D" for the duration of the adjustment operations.
3	Loosen bolt (99)
4	Position range selector lever (33) on transmission in position "D"
5	Tighten screw (99)	Counterhold head (98) and in the process do not twist the shift rod (63) and head (98). Ensure that the range selector lever (33) remains in position "D".	*BA27.60-P-1001-04A
6	Check function