Remove/install accelerator pedal - AR30.12-P-1321GY

ENGINES 642 in MODEL 461.304/305/333/334/340/343/344/346, 463.303/306/336/340/341/346

ENGINES 273 in MODEL 463.202/222/236/237

Shows model 463.303

Fig 1: Identifying Accelerator Pedal Remove/Install Components

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

21.1.11

Switch off ignition, added

Step 1

	Remove/install
1	Switch off ignition
2	Remove cover below dashboard	MODEL 463	AR68.10-P-1500GM
3	Unscrew nut (2)
4	Unhook accelerator pedal (1)	To do this lift accelerator pedal (1) below and turn clockwise.
5	Unlock and disconnect electrical connector on accelerator pedal sensor (B37)
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
6	Install in the reverse order