LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> E500 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - 211 Chassis >> Testing & Repair >> Remove/install air spring - AR32.22-P-1500 >> Remove/install air spring - AR32.22-P-1500T >> Disconnect electrical connector - AR32.22-P-1500-01TV

Disconnect electrical connector - AR32.22-P-1500-01TV

  1. Unclip bracket (1) from the longititudinal member.
  2. Press detent (2) upwards using screwdriver and pull left front axle damping valve unit connector (Y51x1) and right front axle damping valve unit connector (Y52x1) out of bracket (1) in direction of arrow.

    Shown on left front wheel 

    Fig 1: Identifying Front Axle Damping Valve Unit Connector - Shown On Left Front Wheel
    G04984626
  3. Unlock and separate connector for left front axle damping valve unit (Y51x1) and connector for right front axle damping valve unit (Y52x1).
  4. Unclip electrical feed line form the bracket (3) on the longitudinal member.

    IMPORTANTInstallation:  Ensure lines are installed correctly.

scientia non olet · About LEMON Manuals