Remove/install underbody paneling - AR61.30-P-1001T

MODEL 211 

Fig 1: Identifying Underbody Paneling Components

Shown on left underfloor paneling 

	Remove/Install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with lifting platform	Adapter kit	Fig 2
2	Remove bolts (3)
3	Unscrew nuts (4) and remove front underfloor paneling section (1)
4	Unscrew nuts (5) and remove rear underfloor paneling section (2)	The rear partial section of underfloor paneling can also be removed separately.
5	Install in the reverse order

Fig 2: Identifying Adapter Kit (203 589 02 31 00)