126 589 00 21 00 Measuring device - WS35.00-P-0058C

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

FG 35/Set C

MODEL 123, 124, 126, 129, 140, 170, 171, 201, 202, 203, 208, 209, 210, 211, 219, 220, 230

Use:

Measuring device for housing depth and shims on drive pinion

NOTE: Ring gear Ø 185, 187, 198, 210 mm
Ødia. 198 mm in combination with intermediate rings 140 589 41 63 00

Fig 1: Identifying Measuring Device (126 589 00 21 00)

Courtesy of MERCEDES-BENZ USA