126 589 00 15 00 Drift - WS35.00-P-0057C

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

FG 35/Set C

MODEL 123, 124, 126, 129, 170, 201, 202, 203, 208, 209, 210

Use:

Drift for installing tapered roller bearing outer race, for checking that retaining ring is seated correctly and for driving shaft seal into rear axle housing

NOTE: Ring gear Ø 185, 198, 210 mm.

Fig 1: Installing Tapered Roller Bearing Outer Race

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Drift (126 589 00 15 00)

Courtesy of MERCEDES-BENZ USA