124 589 01 15 00 Drift punch - WS35.00-P-0045C

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

FG 35/Set C

MODEL 124, 126, 129, 140, 201, 202, 209

Use/specification:

Drift punch for radial seal ring in ring cylinder

NOTE: Only for center piece with ASD.
Crown wheel dia. 185, 210 mm.

Fig 1: View Of Drift Punch For Radial Seal Ring On Ring Cylinder

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Drift Punch (124 589 01 15 00)

Courtesy of MERCEDES-BENZ USA