000 589 34 34 00 Chuck - WS35.00-P-0006C

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

FG 35/Set C

MODEL 107, 124, 126, 129, 140, 201, 202, 203, 209, 210, 211

Use:

Clamping pliers for tapered roller bearing from drive pinion (for puller 001 589 50 33 00 and extension 000 589 63 34 00)

NOTE: Ring gear Ø 185, 198, 210 mm.

Fig 1: Removing Tapered Roller Bearing From Drive Pinion

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Chuck (000 589 34 34 00)

Courtesy of MERCEDES-BENZ USA