Side Wall -- Testing & Repair -- 209 Chassis - 2 Of 3

• Testing & Repair
  • Testing and repair work: Passenger cars: Side wall - AR63.00-Z-9209AA
  • Partially replace rear outer wheelhouse - AR63.10-P-0660QA
    • Notes
    • Detaching the outer rear wheelhouse - AR63.10-P-0660-01Q
    • Remove outer rear wheelhouse - AR63.10-P-0660-01QA
  • Replace complete rear wheelhouse - AR63.10-P-0661QA
    • Notes
    • Separate complete rear wheelhouse - AR63.10-P-0661-01QA
    • Prepare complete rear wheelhouse liner assembly for installation - AR63.10-P-0661-02QA
    • Install rear wheelhouse complete and weld in - AR63.10-P-0661-03QA
  • Remove/install outer rear wheelhouse - AR63.10-P-0665Q
  • Replacing the rear inner wheelhouse completely - AR63.10-P-0670
    • Replacing the rear inner wheelhouse completely - AR63.10-P-0670P
      • Notes
      • Cut away inner rear wheelhousing - AR63.10-P-0670-01P
      • Prepare inner rear wheelhouse for installation - AR63.10-P-0670-03P
      • Install inner rear wheelhouse - AR63.10-P-0670-04P
      • Prepare outer rear wheelhouse for installation - AR63.10-P-0670-05Q
      • Install outer rear wheelhouse - AR63.10-P-0670-06Q
    • Replacing the rear inner wheelhouse completely - AR63.10-P-0670QA
      • Notes
      • Separate inner rear wheelhouse - AR63.10-P-0670-01QA
      • Prepare rear inner wheelhouse for installation - AR63.10-P-0670-03QA
      • Installing rear inner wheelhouse - AR63.10-P-0670-04QA
      • Prepare rear outer wheelhouse for installation - AR63.10-P-0670-05QA
      • Install rear outer wheelhouse - AR63.10-P-0670-06QA
  • Replacing reinforcement for crossmember under rear seat - AR63.10-P-0696
    • Replacing reinforcement for crossmember under rear seat - AR63.10-P-0696Q
      • Notes
      • Remove cross member reinforcement below rear seat - AR63.10-P-0696-01Q
      • Prepare cross member reinforcement below rear seat - AR63.10-P-0696-02Q
      • Install cross member reinforcement below rear seat - AR63.10-P-0696-03Q
    • Replacing reinforcement for crossmember under rear seat - AR63.10-P-0696QA
      • Notes
      • Remove cross member reinforcement below rear seat - AR63.10-P-0696-01QA
      • Prepare cross member reinforcement below rear seat - AR63.10-P-0696-02QA
      • Install cross member reinforcement below rear seat - AR63.10-P-0696-03QA
      • Remove B-pillar reinforcement - AR63.10-P-0696-04QA
      • Install B-pillar reinforcement - AR63.10-P-0696-05QA
  • Replace reinforcement between B-pillar and wheelhouse - AR63.10-P-0804QA
    • Notes
    • Remove reinforcement between B-pillar and wheelhouse - AR63.10-P-0804-01QA
    • Prepare reinforcement between B-pillar and wheelhouse - AR63.10-P-0804-02QA
    • Install reinforcement between B-pillar and wheelhouse - AR63.10-P-0804-03QA
  • Replace locking lug on partition wall - AR63.10-P-0806QA
    • Notes
    • Remove closing section from dividing wall - AR63.10-P-0806-01QA
    • Prepare closing section on dividing wall - AR63.10-P-0806-02QA
    • Install closing section on dividing wall - AR63.10-P-0806-03QA
  • Remove/install C-pillar - AR63.20-P-0500Q
    • Notes
    • Remove C-pillar - AR63.20-P-0500-01Q
    • Prepare C-pillar for installation - AR63.20-P-0500-02Q
    • Install C-pillar - AR63.20-P-0500-03Q
  • Install and weld in complete A-pillar - AR63.20-P-1100
    • Install and weld in complete A-pillar - AR63.20-P-1100-10Q
    • Install and weld in complete A-pillar - AR63.20-P-1100-10QA
  • Replace outer paneling on upper A-pillar - AR63.20-P-1105QA
    • Notes
    • Remove outer paneling from upper A-pillar - AR63.20-P-1105-01QA
    • Prepare outer paneling on upper A-pillar for installation - AR63.20-P-1105-02QA
    • Install outer paneling on upper A-pillar - AR63.20-P-1105-03QA
  • Inner A-pillar - AR63.20-P-1106
    • Separate inner A-pillar - AR63.20-P-1106-01QA
    • Prepare inner A-pillar - AR63.20-P-1106-02QA
    • Install inner A-pillar - AR63.20-P-1106-03QA