Note on functional reliability of windowbag - AH91.60-P-0693-01A
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
During repair work
- Before carrying out any welding work, remove ignition key, disconnect/insulate ground line of battery and detach connector from restraint system control unit.
- No particular safety precautions are necessary before carrying out painting work with subsequent force drying. The windowbag units can withstand temperatures of up to 100 °C without sustaining any damage.
- Do not allow windowbag units to come into contact with grease, oil or cleaning agents. Otherwise, windowbags may not be installed in a vehicle under any circumstances.
During retrofitting: Observe tensioning straps of windowbag!
The functionality of the windowbag may not be impaired by aftermarket installations, e.g. by wrapping, removing or changing the tensioning straps of the windowbag.
Safety note
The windowbag may not be opened, removed or installed in another vehicle. Danger of malfunctions and injuries!