Left front seat adjustment control module, with memory, purpose - GF91.29-P-2106-02Q
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
The driver-side front seat adjustment control module with memory (N32/1) is connected to the CAN Class B. It records signals (memory block numbers, circuit status from electronic ignition switch control module (N73)) and switch states.
The driver-side front seat adjustment control module with memory (N32/1) controls the motor group front seat adjustment with memory, left (M27).
The driver-side front seat adjustment control module with memory (N32/1) also controls the steering column adjustment motor group (M20).
Scope of function
- 5 seat adjustment functions.
- 2 steering column adjustment functions.
- Driver-side easy entry through automatic seat and steering column adjustment to a position specified by the driver.
- Recording and storage of actual position.
- Moving to stored positions of adjustment functions.
- Easy entry to rear compartment.
Function groups
- Manual adjustment
- Storing positions
- Calling-up of stored positions
- Head restraint presetting
- Easy entry/exit
- Protective functions
- Pre-block cutout
- Anti-lock device/emergency running mode
- Display of seat longitudinal position
- Display of entry/exit position
- Normalization
- Denormalization
- Seat adjustment handicapped vehicle
- Presafe function
- Easy-entry function