Soft top actuation control module, location/purpose/design/function - GF77.37-P-3200QA
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 209.4
| Soft top actuation control module, location | The soft top actuation control module (N52) is located between the trunk and interior compartment in front of the partition wall (trunk side) facing the front of the vehicle. | |
| Soft top actuation control module, purpose | GF77.37-P-3200-03QA | |
| Soft top actuation control module, design | The soft top actuation control module (N52) contains different electronic circuits for actuation and evaluation for realization of the individual functions and is connected to the interior compartment CAN bus. | |
| Soft top actuation control module, function | The soft top actuation control module (N52) contains acceleration sensors and a tilting cone sensor to ensure rollover and crash recognition. It controls and reads in the individual components and processes the CAN bus signals. |