Connect Procedures
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2004 Mercedes-Benz CLK55, 2004 Mercedes-Benz CLK500, 2004 Mercedes-Benz CLK320, 2004 Mercedes-Benz C320, and 2004 Mercedes-Benz C32. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Install new back up battery for TELE AID. Switch OFF service mode in emergency call system by turning ignition on. Confirm "Leave Service Mode" with okay on handset and then confirm "No Telematic Service" with okay. If removed, tighten luggage compartment cargo anchoring lugs to specification. See TORQUE SPECIFICATIONS .
- If a quiescent current retention unit was not used, perform basic programming, read diagnostic trouble code memory and erase trouble codes from memory. See BASIC PROGRAMMING and RETRIEVING & ERASING DIAGNOSTIC TROUBLE CODES .