LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> CLK430 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Overall Vehicle -- 208 Chassis >> Capacities & Specifications >> Gear oils - BB00.40-P-0231 >> Specified gear oils (commercial vehicles) -overview - BB00.40-P-0231-02A

Specified gear oils (commercial vehicles) -overview - BB00.40-P-0231-02A

IMPORTANTFor Allison transmissions, it is absolutely essential to observe the application instructions under point 3.4! 

Commercial vehicles, Sheet 235.0 to 235.27

Major assembly SAE grade Sheet No.
235.0 235.1 235.4 235.0235 235.6 235.8 235.9 235.10 235.1 235.12 235.123 235.20 235.27
Hypoid axle 85 W-90, 90 •       • •           ◦  
Spur gear axle
ZF transfer case
Fuller transmission		 80, 80 W
80 W/85 W
(Hot zones SAE 90, 85 W-90)		   •   •                  
Planetary axle 85 W-90, 90 •       • •              
MB transfer case 8 80W   •   •                  
Transfer case 80 W/85 W   ◦ •           •        
MB transfer case 80 W/85 W75W-90     •           •        
MB manual transmission                            
G 1/15, 1/17, 1/18 1. )
G 2/24, 2/27
G 3/36, 3/40
G 3/50 1.)
G 3/60 1.) , 3/61 G3/70		 80, 80, 80 W
1.) 80 W/85 W 1.)		   •1.)   •1.)         •1.)        
 
G 1/D 14
G 3/45-6, 3/55-6, 3/65, 3/90
G 4/65-6, 4/95-6, 4/95-7, 4/110-6
G 65-7
G 100/125/135 155/180/200
G O 3/60,
G O 3/80
G O 4/95/105/120/130
G TO 24-5
G V 4/65-6, 4/95-6, 4/110-6		 30, 40
80, 80 W
80 W/85 W
(Hot zones SAE 90, 85 W-90)		   •   •         • •2.)      
GO 160/170/190/210 75W-90                 •        
G 16/28/20/32/33 75W/8               •          
G 60, G56, G 85 75W/90W   •               ◦(2.) •    
G60, G56, G85 in tropical countries 40                   • •    
G100, G131-9, G210,
G 211, G 240, G260, G131,
G221, G230, G231		 80W   •3.)   •3.)         •        
ZF manual transmission 80, 80 W
85 W 75 W/85 W
(Hot zones SAE 90, 85 W-90)		   • •4.) •         •       •5.)
ZF converter and clutch unit 400 30                   •      
Voith retarder 10W, (30) 20 W-20                         •
AG4 - automatic part                            
- final-drive assembly               •            
Sprintshift transmission (SSG) 75W/85W               •          
HA 746.211/216/217
HA 746.210 to M 140 993
HA 746.213 to M 138 406		 80W-90           •           •  
HA 746.210 as of M 140 394
HA 746.213 as of M 138 407		                         •  
This table only serves as an overview!
• Should be used.
◦ Can be used.
IMPORTANT When changing to a different oil:
Change service life factors in the maintenance system (WS) and pay attention to specified maintenance intervals.
  1. Only for: G 1/18-5, G 3/50, G 3/60 without MS synchronization
  2. Use engine oils as under Sheet 235.12, SAE 30 for common oil circuits with ZF torque converter clutch 400
  3. Transmissions with oil coolers only.
  4. With intarder 5.)
  5. Use engine oils as under Sheet 235.27, SAE 30 for common oil circuits with ZF torque converter clutch 400
  6. Only install W 4 B 035 as of major assembly end no 00 57 33 or modified shift plate. 00 57 33 or fit modified shift plate.
  7. Only for: G 1/18-5, G 3/50, G 3/60 with MS synchronization
  8. Only use in exceptional cases! If no synthetic oil in accordance with 235.4 or 235.11 available.
  9. IMPORTANT For Allison transmissions, it is absolutely essential to observe the application instructions on Sheet 231.0 under point 3.4!
  10. Sheet 236.5 only for HT700
Major assembly SAE grade Sheet No.
236.1 236.12 236.123 236.5 Sheet 236.1236 No. 236.7 236.8 236.9 236.81 236.81
Mechanical steering ATF     •              
MB manual transmission 7.)
G 1/15, 1/17, 1/18
G 2/24, 2/27
G 3/36, 3/40
G 3/50
G 3/60, 3/61
G 3/70		 ATF   •                
MB power steering ATF   • •   • •        
ZF power steering ATF   • •   • •        
Hydraulic fan drive for auxiliary radiator ATF   • •              
MB automatic transmission ATF •       • • •     •
MB automatic transmission W 4 B 035 6.) ATF         • •        
Voith/ZF automatic transmission ATF •       • • • •   •
Allison transmission 9.) ATF       ◦10.)       •    
ZF 4 HP 20 ATF                 •  
AG4 - automatic part                   •  
- final-drive assembly                      
This table only serves as an overview!
• Should be used.
◦ Can be used.
IMPORTANT When changing to a different oil:
Change service life factors in the maintenance system (WS) and pay attention to specified maintenance intervals.
  1. Only for: G 1/18-5, G 3/50, G 3/60 without MS synchronization
  2. Use engine oils as under Sheet 235.12, SAE 30 for common oil circuits with ZF torque converter clutch 400
  3. Transmissions with oil coolers only.
  4. With intarder 5.)
  5. Use engine oils as under Sheet 235.27, SAE 30 for common oil circuits with ZF torque converter clutch 400
  6. Only install W 4 B 035 as of major assembly end no 00 57 33 or modified shift plate. 00 57 33 or fit modified shift plate.
  7. Only for: G 1/18-5, G 3/50, G 3/60 with MS synchronization
  8. Only use in exceptional cases! If no synthetic oil in accordance with 235.4 or 235.11 available.
  9. IMPORTANT For Allison transmissions, it is absolutely essential to observe the application instructions on Sheet 231.0 under point 3.4!
  10. Sheet 236.5 only for HT700
scientia non olet · About LEMON Manuals