Electrical function schematic for shift-lock - PE27.19-P-2059-97FAB
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2014 Mercedes-Benz C63 AMG, 2013 Mercedes-Benz C63, 2012 Mercedes-Benz C63, 2011 Mercedes-Benz C63, and 2011 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
| Code: | Designation: | Position: |
| 1 | Circuit 15, status | 9G |
| 1 | Circuit 15, status | 5E |
| 1 | Circuit 15, status | 18H |
| 2 | DAS [FBS] start enable, status | 9G |
| 2 | DAS [FBS] start enable, status | 18G |
| 3 | Selector lever position, status | 5G |
| 4 | Service brake, status | 6E |
| 4 | Service brake, status | 19H |
| 5 | Selector lever positions R and P locking solenoid, actuation | 9K |
| 6 | Brake light switch, status | 25D |
| 7 | Control solenoid valve, actuation | 6C |
| 8 | Turbine wheel rpm sensor, signal | 4H |
| 9 | Internal transmission speed rpm sensor, signal | 3H |
| 10 | Output shaft rpm sensor, signal | 5H |
| 11 | Selection range sensor, signal | 3D |
| 12 | Transmission oil temperature sensor, signal | 4D |
| A8/1 | Transmitter key | 18B |
| CAN C | Drive train CAN | 12F |
| CAN C | Drive train CAN | 6F |
| CAN C | Drive train CAN | 6F |
| CAN C | Drive train CAN | 12F |
| CAN E | Chassis CAN | 17E |
| CAN E | Chassis CAN | 20E |
| N15/5 | Electronic selector lever module control unit | 8H |
| N3/10 | ME-SFI [ME] control unit | 17J |
| N3/10 | ME-SFI [ME] control unit | 20J |
| N3/10 | ME-SFI [ME] control unit | 23J |
| N3/9 | CDI control unit | 11J |
| N3/9 | CDI control unit | 14J |
| N30/4 | Electronic Stability Program control unit | 23D |
| N30/4 | Electronic Stability Program control unit | 23D |
| N73 | Electronic ignition switch control unit | 17B |
| S2/3 | KEYLESS GO start/stop button | 14B |
| S9/1 | Stop lamp switch | 26E |
| U1018 | Valid for gasoline engine 276 | 19J |
| U152 | Valid for gasoline engine 156 | 19J |
| U157 | Valid for combustion engine 272 DE | 22J |
| U169 | Valid for gasoline engine 271 DE | 22J |
| U203 | Valid without DISTRONIC PLUS | 22C |
| U739 | Valid for gasoline engine 271 continuous fuel injection system (electronic) | 16J |
| U740 | Valid for diesel engine 646 | 10J |
| U819 | Valid for gasoline engine 272 | 16J |
| U82 | Valid for KEYLESS GO | 14A |
| U880 | Valid for diesel engine 642 | 10J |
| U909 | Valid for DISTRONIC PLUS | 23C |
| U948 | Valid for diesel engine 651 | 13J |
| Y3/8n1 | Turbine wheel rpm sensor | 3J |
| Y3/8n2 | Internal transmission speed rpm sensor | 2J |
| Y3/8n3 | Output shaft rpm sensor | 4J |
| Y3/8n4 | Fully integrated transmission control unit | 3E |
| Y3/8s1 | Selection range sensor | 1A |
| Y3/8s2 | Transmission oil temperature sensor | 3B |
| Y3/8y1 | Working pressure control solenoid valve | 6A |
| Y3/8y2 | Clutch control solenoid valve K1 | 6A |
| Y3/8y3 | Clutch control solenoid valve K2 | 6A |
| Y3/8y4 | Clutch control solenoid valve K3 | 6B |
| Y3/8y5 | Multidisk brake control solenoid valve B1 | 6B |
| Y3/8y6 | Multidisk brake control solenoid valve B2 | 6B |
| Y3/8y7 | Multidisk brake control solenoid valve B3 | 6C |
| Y3/8y8 | Torque converter lockup clutch control solenoid valve | 6C |
| Y66/2 | Selector lever positions R and P locking solenoid | 8K |