LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> CLK320 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Lighting & Washer System -- Maintenance -- CLK350 Coupe (209.356)) >> Maintenance >> Set low beam - AP82.10-P-8260-01A

Set low beam - AP82.10-P-8260-01A

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
  1. When setting the height, the light-dark boundary must have the same coverage as the horizontal broken line (4) of the device. For the side adjustment the kinked line (5) must be under the central mark (6) start at the horizontal separating line (4).
    Fig 1: Identifying Horizontal Separating Line, Kinked Line And Central Mark
    G07719457Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals