Special tools: Passenger cars: Part numbers 221 - WS00.01-Z-9221AZ
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 221 589 00 15 00 Drift | FG 35/Set B | WS35.00-P-0247B |
| 221 589 00 16 00 Unlocking tool | FG 42/Set B | WS42.00-P-0085B |
| 221 589 00 23 00 Inspection and welding device | Group 63/Set K | WS63.00-P-0130K |
| 221 589 00 27 00 Set of pulling devices | Group 62/64/Set K | WS62.00-P-0148K |
| 221 589 00 31 00 Set of emergency buffers | FG 32/Set B | WS32.00-P-0085B |
| 221 589 00 33 00 Puller | FG 32/33/46/Set B | WS33.00-P-0177B |
| 221 589 00 33 00 Puller | FG 35/Set B | WS35.00-P-0269B |
| 221 589 00 39 00 Removal tool | FG 72/Set K | WS72.00-P-0033K |
| 221 589 00 43 00 Extraction and installation tool | FG 35/Set B | WS35.00-P-0243B |
| 221 589 00 62 00 Set of spacer bolts | FG 35/Set B | WS35.00-P-0250B |
| 221 589 00 91 00 Adapter kit | FG 83/Set B | WS83.00-P-0061B |
| 221 589 00 98 00 Protective covering | FG 88/72 Set K | WS88.00-P-0065K |
| 221 589 01 09 00 Insertion open end wrench | FG 32/Set B | WS32.00-P-0089B |
| 221 589 01 15 00 Drift | FG 35/Set B | WS35.00-P-0248B |
| 221 589 01 23 00 Welding jig | Group 62/Set K | WS62.00-P-0147K |
| 221 589 01 31 00 Steering gear housing support | FG 46/Set C | WS46.00-P-0099C |
| 221 589 01 33 00 Detaching tool | FG 32/Set B | WS32.00-P-0084B |
| 221 589 01 34 00 Thrust piece set | FG 33/Set B | WS33.00-P-0176B |
| 221 589 01 43 00 Extraction and installation tool | FG 35/Set B | WS35.00-P-0244B |
| 221 589 01 62 00 Eyebolt set | FG 15/54/Set B | WS15.00-P-0059B |
| 221 589 01 98 00 Assembly tool | FG 33/Set B | WS33.00-P-0184B |
| 221 589 02 09 00 Plug in open-end wrench | FG 46/Set B | WS46.00-P-0097B |
| 221 589 02 15 00 Drift | FG 35/Set B | WS35.00-P-0249B |
| 221 589 02 33 00 Puller | FG 33/Set B | WS33.00-P-0180B |
| 221 589 03 09 00 Socket | FG 42/Set B | WS42.00-P-0088B |
| 221 589 03 23 00 Set of cutting templates | FG 63/Set K | WS63.00-P-0129K |
| 221 589 03 33 00 Puller fork | FG 33/Set B | WS33.00-P-0182B |
| 221 589 03 43 00 Extraction and insertion tool | FG 35/Set B | WS35.00-P-0257B |
| 221 589 04 15 00 Drift | FG 08/Set B | WS08.00-P-0008B |
| 221 589 04 15 00 Drift | FG 33/Set B | WS33.00-P-0185B |
| 221 589 04 23 00 Set of spacer blocks | Group 65/set K | WS65.00-P-0041K |
| 221 589 04 33 00 Extraction tool | FAG 33/Set B | WS33.00-P-0187B |
| 221 589 05 33 00 Puller | FG 33/46/Set B | WS33.00-P-0188B |
| 221 589 05 63 00 safety plug | FG 15/Set B | WS15.00-P-0060B |
| 221 589 06 23 00 Set of templates | Group 88/Set K | WS88.00-P-0062K |
| 221 589 06 63 00 Spring compressor | FG 32/Set B | WS32.00-P-0101B |
| 221 589 07 23 00 Upright | FG 62/set K | WS62.00-P-0150K |