Special tools: Passenger cars: Part numbers 116 - WS00.01-Z-9116AZ

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL all

116 589 00 13 00 Socket	FG 01/Set B	WS01.00-P-0020B
116 589 00 15 00 Drive shaft	FG 27/Set C	WS27.00-P-0010C
116 589 00 15 02 O-ring	FG 27/Set C	WS27.00-P-0010-01C
116 589 00 17 00 Box wrench	FG 32/Set B	WS32.00-P-0004B
116 589 00 17 01 Box wrench	FG 32/Set B	WS32.00-P-0004-01B
116 589 00 34 00 Threaded bolt	FG 05/Set B	WS05.00-P-0080B
116 589 00 35 00 Removal tool	FG 35/Set C	WS35.00-P-0023C
116 589 00 43 00 Drift punch	FG 05/Set B	WS05.00-P-0081B
116 589 01 01 00 Holding wrench	FG 05/Set B	WS05.00-P-0082B
116 589 01 21 00 Measuring device	FG 35/Set C	WS35.00-P-0025C
116 589 01 33 00 Puller	FG 46/Set B	WS46.00-P-0007B
116 589 01 34 00 Threaded bolt	FG 05/01/Set B	WS05.00-P-0083B
116 589 01 40 00 Retaining lock	FG 03/Set C	WS03.00-P-0017C
116 589 01 43 00 Drift punch	FG 05/Set B	WS05.00-P-0084B
116 589 01 62 00 Removal and installation tool	FG 42 FG 01/03/26/27/28/33/35/Set B	WS42.00-P-0017B
116 589 01 62 00 Removal and installation tool	FG 68/91/Set B	WS91.00-P-0023K
116 589 02 01 00 Valve adjusting wrench	FG 05/Set A	WS05.00-P-0085A
116 589 02 01 01 Open-end wrench	FG 05/Set A	WS05.00-P-0085-01A
116 589 02 07 00 5 mm screwdriver, 5 mm	FG 00	WS00.00-P-0023Z
116 589 02 09 00 Socket	FG 26/Set C	WS26.00-P-0014C
116 589 02 34 00 Threaded bolt	FG 05/Set B	WS05.00-P-0086B
116 589 02 59 00 Assembly shell	FG 46/Set C	WS46.00-P-0009C
116 589 03 07 00 T-handle Allen wrench	FG 00	WS00.00-P-0024Z
116 589 03 34 00 Threaded bolt	FG 05/Set B	WS05.00-P-0087B
116 589 04 09 00 Retainer wrench	FG 32/Set B	WS32.00-P-0007B
116 589 04 15 00 Drift punch	FG 33/Set C	WS33.00-P-0009C
116 589 04 62 00 Installation tool	FG 33/Set C	WS33.00-P-0010C
116 589 06 21 00 Check screw	FG 40/Set B	WS40.00-P-0010B
116 589 06 59 00 Assembly stand	FG 26/Set C	WS26.00-P-0015C
116 589 06 59 00 Assembly stand	FG 27/Set C	WS27.00-P-0014C
116 589 06 59 00 Assembly stand	GROUP 28/Set C	WS28.00-P-0006C
116 589 06 59 00 Assembly stand	FG 33/Set C	WS33.00-P-0011C
116 589 06 63 00 Magnetic rod	FG 05/Set B	WS05.00-P-0088B
116 589 07 21 00 Measuring device	FG 35/Set C	WS35.00-P-0030C
116 589 07 43 00 Drift punch	FG 46/Set C	WS46.00-P-0010C
116 589 07 59 00 Hammer block	FG 67/Set K	WS67.00-P-0003K
116 589 08 61 00 Assembly drift	FG 35/Set C	WS35.00-P-0031C
116 589 09 33 00 Puller	FG 33/Set C	WS33.00-P-0012C
116 589 09 43 00 Removal and installation tool	FG 41/Set C	WS41.00-P-0001C
116 589 10 15 00 Installation punch	FG 35/Set C	WS35.00-P-0032C
116 589 10 43 00 Puller and installation tool	FG 35/Set C	WS35.00-P-0034C
116 589 11 31 00 Clamping jaws	FG 35/Set C	WS35.00-P-0035C
116 589 11 43 00 Installation tool	FG 33/Set C	WS33.00-P-0013C
116 589 11 61 00 Installer	FG 35/33/Set C	WS35.00-P-0036C
116 589 12 33 00 Pulling arms	FG 26/Set C	WS26.00-P-0017C
116 589 13 15 00 Drift punch	FG 46/Set C	WS46.00-P-0011C
116 589 13 43 00 Puller and installation tool	FG 35/Set C	WS35.00-P-0037C
116 589 14 15 00 Drift punch	FG 46/Set C	WS46.00-P-0012C
116 589 15 15 00 Drift	FG 35/Set C	WS35.00-P-0038C
116 589 16 23 00 Locating gauge	FG 32/Set C	WS32.00-P-0009C
116 589 16 33 00 Puller	FG 33/Set C	WS33.00-P-0014C
116 589 17 21 00 Gauge pin	FG 03/Set C	WS03.00-P-0019C
116 589 18 61 00 Assembly drift	FG 35/Set C	WS35.00-P-0040C
116 589 20 33 00 Impact extractor	FG 05/01/03/07/Set B	WS05.00-P-0089B
116 589 22 21 00 Measuring device	FG 40/Set B	WS40.00-P-0012B
116 589 22 33 00 Removal and installation tool	FG 33/set A	WS33.00-P-0016A
116 589 22 33 01 Claw	FG 33/Set A	WS33.00-P-0016-01A