Risk of injury caused by scraping or cutting body parts on sharp vehicle parts - AS00.00-Z-0017-01A
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
Risk of injury
When performing work on body parts, major assembly parts and chassis parts that, due to their manufacturing process or their finishing stage, have not or have not yet been deburred, there is the risk of injuries caused by cutting, tearing or scraping on non-deburred edges.
Safety instructions/precautions
- Wear protective gloves.
- Deburr repair panels and edges that have been cut.
- Protect sharp-edged components against contact