LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> CL55 >> Repair and Diagnosis >> Steering >> Power Steering >> Steering -- Testing & Repair -- 215 & 220 Chassis >> Testing & Repair >> Remove/install inner tie rod with axial joint - AR46.40-P-0201 >> Remove/install inner tie rod with axial joint - AR46.40-P-0201PW

Remove/install inner tie rod with axial joint - AR46.40-P-0201PW

MODEL 203.081 /084 /087 /092 /281 /284 /287 /292, 211.08 /09 /28 /29, 220.083 /084 /087 /183 /184 /187 

Shown on model 203 

Fig 1: Identifying Inner Tie Rod With Axial Joint Remove/Install Components - Shown On Model 203
G04737232
REMOVINGINSTALLING Remove/install    
1 Remove bellows   AR46.40-P-0400PW 
2 Counterhold rack using open wrench (013)    
3 Remove inner track rod with axial joint (12) IMPORTANT Do not use force (hammer impact, strong lever action).  
    TORQUE SPECIFICATION *BA46.40-P-1003-01E 
    SPECIAL TOOL Figure
4 Install in the reverse order    
TORQUE SPECIFICATION TIE ROD

Number Designation Models 203.081/084/ 087/092/281/ 284/287/292 Model 220.083/ 084/087/ 183/184/ 187 Model 211.08/09/ 28/29
BA46.40-P-1003-01E Inner track rod with axial joint to rack-and-pinion joint Nm 110 110 110
Fig 2: Identifying Open End Wrench (201 589 00 01 00)
G04737233
scientia non olet · About LEMON Manuals