Removing and installing cup holder - AR91.12-P-1621N

MODEL 215 

Fig 1: Identifying Cup Holder Remove/Install Components - Model 215

	Removal, installation
1	Open cover (2) on center armrest
2	Open cup holder (1) and remove stowage compartment (3)	Unclip stowage compartment (3) first at rear (arrow) and remove upward
3	Pull out cup holder (1) toward front	Lift rack (4) with assembly wedge
		Installation  : Insert cup holder guides (6) (see arrows). Ensure that rack (4) and gear (5) mesh	Figure
4	Install in opposite order
5	Check cup holder (1) for proper function

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)