Removing and installing front seat control module - AR91.29-P-1550N

MODEL 215 

Fig 1: Identifying Front Seat Control Module Remove/Install Components - Model 215

	Removal, installation
1	Remove front seat cushion		AR91.10-P-1070N
2	Unhook tensioning straps (1)
3	Disconnect electrical connectors (2)
4	Unscrew inner Torx screws (3, 2 each)	Torx bit set	Figure
5	Unlock cover (7) from clamps (6) and open
6	Disconnect electrical connectors from connector strip (8) and remove left/right convenience adjustment control modules (N31/1, N32/2)	Installation:  Connectors are mix-up-proof. Ensure that cables are routed correctly
7	Turn left/right convenience seat adjustment control modules (N31/1, N32/2) on seat adjustment device (5) downward (see arrows)	Installation:  Ensure that cable straps (4) are positioned properly
8	Install in opposite order
9	Check electric seat adjustment for proper function

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)