Removing and installing mirror triangle trim - AR88.70-P-9080N

MODEL 215 

Fig 1: Identifying Mirror Triangle Trim Remove/Install Components

	Removal, installation
1	Completely remove outside rearview mirror		AR88.70-P-9000N
2	Press covering (6) off with assembly wedge (7)		Figure
3	Unscrew screws (5) from front door (4) and remove covering from mirror triangle (1)	Installation:  Ensure that the seal (2) and sealing washers (3) are seated properly.
4	Install in opposite order

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)