Remove/install electronic stability program (ESP) control unit - AR42.45-P-0820P
MODEL 203, 209
Shown on model 203
Fig 1: Identifying Electronic Stability Program Control Unit Remove/Install Components (Shown On Model 203)
| Remove/install | |||
| 1 | Switch off ignition | ||
| 2 | Unlock and remove coupling (42) at control unit (N47-5) | ||
| 3 | Remove bolts (32) from control unit (N47-5) | *BA42.45-P-1005-01B | |
| 4 | Remove control unit (N47-5) from the hydraulic unit (A7/3) from the front | ||
| 5 | Install in the reverse order |
| Number | Designation | Model 203 | Model 209 | |
|---|---|---|---|---|
| BA42.45-P-1005-01B | Nut, control unit to ESP hydraulic unit | Nm | 2 | 4 |