Removing and installing front left or right rpm sensor - AR42.30-P-0712A

MODELS 129, 140, 170, 202, 203, 208, 210 

Fig 1: Identifying Front Left Or Right RPM Sensor Remove/Install Components

MODIFICATION NOTES

3.5.96

Mount for rpm sensor on front axle modified

refer to note, fig. item (L6/1b; L6/2b)

Fig. item, etc.	Work instructions
L6/1a, L6/2a	Self-locking Allen screws, rpm sensor	Replace screws.	*BA42.30-P-1001-01A
L6/1, L6/2	Rpm sensor, front	Installation  : Inspect wheel hub rotor for damage. Ensure cleanliness of magnetic tip. Models 202, 210 Rpm sensors from Bosch and Teves must not be installed together.
	Mount for rpm sensor on front axle modified	Model 202 as of 09.95	BT42.30-P-0001-01A
L6/1b, L6/2b	Centering sleeve	Replace centering sleeves. Model 202 as of 9.95
		Lightly grease bore in steering knuckle.	*BR00.45-Z-1001-06A

FRONT AXLE RPM SENSOR

Number	Designation		Model 129	Model 140	Model 170	Model 202	Model 203
BA42.30-P-1001-01A	Self-locking screw of front axle rpm sensor to steering knuckle	Nm	22	22	22	22	25

FRONT AXLE RPM SENSOR

Number	Designation		Model 208	Model 210
BA42.30-P-1001-01A	Self-locking screw of front axle rpm sensor to steering knuckle	Nm	22	22

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51