Remove/install an oxygen sensor - AR14.00-P-5303GS

ENGINES 111.958/ 983 

Fig 1: Identifying Oxygen Sensor And Connector Before TWC

Fig 2: Identifying Oxygen Sensor And Connector After TWC

Figure/item, etc.	Work instructions
G3/1	O2 sensor downstream of TWC	Installation:  Coat thread on oxygen sensor with heat-resistant lubricant	*BR00.45-Z-1005-06A
			Figure
			Figure
			Figure
			*BA14.00-P-1001-01A
G3/1x1	Connector for O2 sensor downstream of TWC
G3/2	O2 sensor downstream of TWC	Installation:  Coat thread on oxygen sensor with heat-resistant lubricant	*BR00.45-Z-1005-06A
			Figure
			Figure
			Figure
			*BA14.00-P-1001-01A
G3/2x1	Connector for O2 sensor upstream of TWC

O2 SENSOR

Number	Designation		Engines 104, 111, 119, 120, 137, engine 166 in model 168
BA14.00-P-1001-01A	O2 sensor on exhaust pipe/ exhaust manifold	Nm	55

Fig 3: Identifying Wrench Socket (111 589 03 09 00)

Fig 4: Identifying Ring Wrench Socket (000 589 71 03 00)

Fig 5: Identifying Torque Wrench (001 589 66 21 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste	A 000 989 76 51