Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A

MODEL 129, 140, 163, 170, 171, 202, 203, 208, 210 

Fig 1: Locating Attachment Holes For Mercedes-Benz Quick-Clamping Devices - Model 129, 140, 170, 202, 203, 208, 210

Fig 2: Locating Attachment Holes For Mercedes-Benz Quick-Clamping Devices - Model 163

Fig 3: Identifying Mercedes-Benz Quick-Clamping Device

Model 129, 140, 170, 202, 203, 208, 210 

MODEL 163 

	Installing, removing
1	Attach quick-clamping devices to front and rear axles and remove clamp handles	The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the five mounting holes (arrows) in the rim. Check quick-clamping devices, wheel mirrors and measurement sensors at regular intervals in accordance with the manufacturer's instructions Quick-clamping device	Fig 4
2	Attach wheel mirrors or measurement sensors
3	Remove in reverse order

Fig 4: Identifying Quick Clamping Device (124 589 01 31 00)