LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550C >> Pulling off joint flange - AR35.31-P-0550-06B

Pulling off joint flange - AR35.31-P-0550-06B

PULLLER Radial seal ring and joint flange on drive pinion modified Rear axle center assembly with 185 mm, 210 mm dia. ring 01.04.98 BT35.31-P-0012-01A

Fig 1: Identifying Puller (129 589 01 33 00)
G04636415
    1. If necessary, mark joint flange relative to drive pinion.
  2. Pull joint flange off drive pinion, use puller SPECIAL TOOL (062) if necessary.

    Shown: 168 mm dia. rear axle center assembly 

    Fig 2: Identifying Puller
    G04636416
scientia non olet · About LEMON Manuals