LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 1 Of 2 >> Testing & Repair >> Remove/install tie rod and replacement of rubber mount - AR35.20-P-0112B >> Removal and installation of track rod rubber mount - AR35.20-P-0112-01B

Removal and installation of track rod rubber mount - AR35.20-P-0112-01B

Fig 1: Identifying Extractor/Puller (124 589 02 43 00)
G04636248

    Removal of rubber mount 

  1. Pull rubber mount (4b) out of track rod (4) using extractor/puller (04a-04d).
    Fig 2: Identifying Track Rod, Rubber Mount, Thrust Ring And Sleeve
    G04636249

    2. Installation of rubber mount 

  2. Pull rubber mount (4b) into track rod (4) using extractor/puller (04a-04d) until the spacer ring (04a) contacts the eye of the track rod.
    Fig 3: Sectional View Of Rubber Mount
    G04636250
scientia non olet · About LEMON Manuals