Note on function of SRS MIL - AD91.60-P-2000-04A
Model 124 as of 7/93, except 124.230, except 124.290, except 124.226, except 124.393, except 124.330, except driver/front passenger airbag, except
Model 129 as of 7/93
Model 140 as of 7/93
Model 202 as of 7/93
Models 170, 210, 208
- Airbag indicator and warning lamp goes out after approx. 4 s → system in order.
- Airbag indicator and warning lamp goes out after approx. 2 min → system fault, which does not impair occupant safety.
Vehicle without side airbag:
- Undervoltage
- Airbag indicator and warning lamp SRS
- Seat belt buckle
Vehicle with side airbag:
Airbag indicator and warning lamp goes out after approx.
4-20 s → system in order.
Airbag indicator and warning lamp illuminated in the event of the following faults for as long as the faults exist
- Undervoltage
- Airbag indicator and warning lamp SRS
- Communication fault in the side airbag sensors
- Seat belt buckle
- Seat occupied recognition
- Airbag indicator and warning lamp illuminated permanently → system fault which can result in failure to deploy/incorrect deployment.
- Airbag indicator and warning lamp flashes after replacing the control module → control module programming/parameterizing not carried out.
Airbag indicator and warning lamp can only be erased via the Hand-Held Tester if there is no current fault
Function of airbag OFF indicator lamp (E16, N72e1)
On vehicles with automatic child seat recognition (ACSR) only:
MB Babysafe child seat not fitted on front passenger seat:
- Airbag Off indicator lamp goes out after approx. 4s → ACSR in order
- Airbag Off indicator lamp does not go out → ACSR defective
MB Babysafe child seat fitted:
- If the MB Babysafe child seat is fitted the airbag OFF indicator lamp (E16, N72e1) comes on and signals the recognition of the child seat.
The front passenger airbag is switched off. The side airbag and emergency tensioning retractor remain in operation.
The airbag OFF indicator lamp is dimmed when the vehicle lights are switched on.