Notes on Vario roof assembly work - AH77.30-P-0002-01R

Model 170, 171.4, 230.4 

Before removing the Vario roof or its individual components, mark the installation position of the electrical and hydraulic lines which have to be removed or exposed.

Mark particularly the electrical or hydraulic lines fastened in the area of the main bearing or other moving parts of the Vario roof.

Always observe installation markings when installing, otherwise improperly routed electrical or hydraulic lines can be damaged when opening and closing the Vario roof.

After completion of the work on the Vario roof, check for proper line routing while moving the Vario roof.