Retrofitting control cable - AZ88.50-P-0002-04G
- Hook nipple on control cable (1) into emergency release handle (2) and route through guide in handle recess (3).
- Insert control cable sheath into mount on handle recess (3).
- Route control cable (1) through hollow space in trunk lid to installation position for locking part.
- Clip handle recess (3) into cutout on trunk lid.
- Hook nipple (arrow) on control cable (1) into moving lever (8) on locking part (4).
- Install hose mount (6) with control cable (7) on mount (5).
Push hose mount (6) with control cable (7) into groove on mount (5).